TISAX has three assessment levels: AL1, AL2 and AL3. AL1 is a self-assessment nobody checks, and it does not lead to a label. AL2 is mostly a remote plausibility check. AL3 is a thorough on-site verification. You do not choose freely: your customer's request sets the level, based on the sensitivity of the data or prototypes you handle. For a 2027 assessment, get the required labels and assessment level from the customer before registering. Confirm the applicable ISA catalogue with the audit provider; an AL1 self-assessment does not produce a TISAX label. See ENX ISA2027 order-date rules.
The levels at a glance
| Level | How it is assessed | Used for | Labels? |
|---|---|---|---|
| AL1 | Self-assessment only, with no external check | Internal use only | No |
| AL2 | Plausibility check of your self-assessment and evidence, usually remote, with interviews | High protection needs, such as confidential data | Yes |
| AL3 | Thorough verification on site, with inspections and interviews | Very high protection needs, such as strictly confidential data and prototypes | Yes |
TISAX level 2 vs level 3
| Comparison criteria | AL2 | AL3 |
|---|---|---|
| Catalogue | VDA ISA | VDA ISA |
| Depth | Plausibility check of evidence | Full verification of evidence |
| Location | Mostly remote | On site |
| Data | Confidential | Strictly confidential, prototypes |
| Effort with us | About 8 to 12 weeks of preparation | About 12 to 16 weeks of preparation |
| Assessment cost | Usually lower | Usually higher, because of on-site days |
Levels and labels are different things
The level says how deeply you are assessed. The label says what you are assessed for. See TISAX requirements for more on the labels, which include:
- Information: confidential and strictly confidential.
- Availability: high and very high.
- Prototype protection: parts, vehicles, test vehicles, and events and shootings.
- Data protection: data and special data.
How to work out which level you need
- Read your customer's request. It usually appears in a supplier letter, a contract or a portal message.
- If it is vague, ask in writing. Ask which labels they want to see on the ENX portal, and at which level.
- Check which sites are in scope. The assessment covers specified locations.
- Register for what was asked. Going too low can mean doing it twice, and going too high costs more for no benefit.
Our TISAX service starts at $8,000 and ranges up to $35,000 by company size and scope. The package includes preparation and the initial independent assessment.
Not sure which TISAX level you need?
Send us your customer's request. We will read it and tell you the level and labels.
Get my free quoteFrequently asked questions
What are the TISAX levels?
AL1, AL2 and AL3 are assessment levels. AL1 is a self-assessment with no external check. AL2 is mostly a remote plausibility check. AL3 is a thorough on-site verification.
What is the difference between TISAX level 2 and level 3?
Both use the same VDA ISA catalogue, but AL3 goes deeper. AL2 checks your self-assessment and evidence, usually remotely. AL3 verifies on site through inspections and interviews.
Which TISAX level do I need?
Your customer decides. Confidential data commonly points to AL2. Strictly confidential data and prototype handling commonly point to AL3.
Does TISAX level 1 get a label?
No. AL1 is not used for TISAX labels, since nobody checks the self-assessment. Labels come from AL2 and AL3 assessments.
How long does a TISAX assessment take?
With us, about 8 to 12 weeks to be ready for AL2 and 12 to 16 weeks for AL3 or prototype labels, followed by the assessment and any corrective actions.
How long is a TISAX result valid?
Up to three years.
Is AL3 more expensive than AL2?
Usually, because it adds on-site days and tends to need more controls in place. The exact cost depends on your labels and number of sites.
More on TISAX
- TISAX Requirements: What You Need Before an Assessment
- ISO 27001 vs TISAX
- TISAX Certification: Cost, Levels and Process