TISAX for suppliers in Germany in 2027

We read your OEM's request, prepare you against the VDA ISA and support you through the assessment until the label is on the ENX portal.

  • The right catalogue for your order date: VDA ISA 6 or ISA2027.
  • Level and labels taken straight from your OEM or Tier 1 request.
  • Your ISO 27001 or IT-Grundschutz work reused against the VDA ISA questions.
Organizations supported by Avantcert
3,000+
Typical fee for 5 to 50 employees
$8,000
Maximum TISAX label validity
3 years

Your TISAX scope

Step 1 of 2

How many people work at your company?
What did your customer ask for?
Avantcert package price
$8,000
Timeline
8 to 12 weeks to assessment

Illustrative comparison $13,500 Price difference $5,500

The VDA ISA information security questions, answered with evidence an auditor can check remotely.

Avantcert reference price. Your final fee depends on team size and scope. We negotiate it on a call. Includes preparation and the initial independent TISAX assessment for the agreed scope.

You pick a time on the next screen.

How much does TISAX cost in Germany?

Updated

Avantcert's TISAX package price starts at $8,000 for 5 to 50 employees to $35,000 for 201 to 500, against an illustrative comparison of $13,500 to $58,500. The assessment usually happens 8 to 16 weeks after we start: AL2 sits at the short end, AL3 and prototype labels at the long end. The package includes the agreed initial assessment by an ENX-approved provider. Labels last up to three years.

TISAX started here: the VDA wrote the catalogue, ENX in Frankfurt runs the scheme, and German OEMs write it into purchasing terms. We read your customer's request, prepare you against the right VDA ISA version, plan the prototype controls and support you until the label is published. For assessments ordered in 2027, ENX specifies ISA2027. Confirm the order date and catalogue with your audit provider, then review supply-chain, prototype and operational-technology evidence against the new catalogue.

Where TISAX requests come from

Volkswagen, BMW, Mercedes-Benz, Audi and Porsche all use TISAX, and the requirement passes from Tier 1 to Tier 2 and on to service providers.

  • Mittelstand suppliers

    A family-owned parts maker gets a supplier letter with a deadline, often without an information security team to answer it.

  • Engineering partners

    Development service providers holding CAD data or software for an OEM usually need an information label at AL3 when the data is strictly confidential.

  • Prototype handlers

    Workshops, transport firms and photo studios handling prototypes need prototype labels, with physical security that is checked on site.

Who does what on your TISAX

We prepare you and an ENX-approved audit provider decides. That separation is why your buyer trusts the result.

Who does what on a TISAX projectThree lanes across five stages. You name the deadline and approve the work. Avantcert scopes, writes and runs the readiness review. ENX audit provider works on the far side of an independence line and alone decides the result.ScopeBuildReadinessAssessmentLabelYouAvantcertENX auditproviderIndependence line: we never audit a client we preparedShare yourcustomer's requestConfirm level andlabels, registerwith ENXComplete the VDAISA and writemissing policiesApprove them andrun the controlsRun apre-assessment attarget maturityHandle correctiveactions, with nosay in the resultAssesses you at theagreed levelPublishes theresult to the ENXportalShare it with yourcustomer
  1. Scope

    You
    Share your customer's request
    Avantcert
    Confirm level and labels, register with ENX
  2. Build

    Avantcert
    Complete the VDA ISA and write missing policies
    You
    Approve them and run the controls
  3. Readiness

    Avantcert
    Run a pre-assessment at target maturity
  4. Independence line: we never audit a client we prepared
  5. Assessment

    Avantcert
    Handle corrective actions, with no say in the result
    ENX audit provider
    Assesses you at the agreed level
  6. Label

    ENX audit provider
    Publishes the result to the ENX portal
    You
    Share it with your customer

Who assesses you in Germany

ENX-approved audit providers carry out TISAX assessments, and several are based in Germany. You register on the ENX portal, choose a provider and share the result with the partners you select.

We prepare you, join the assessment and handle the corrective action plan. We are not an audit provider, so we never assess a client.

Check the auditor before your buyer does

  • Book the provider earlyAudit providers in Germany can book up, especially around the catalogue change to ISA2027. Ask for dates and the ISA version before you commit to a customer deadline.
  • See the result on the ENX portalA real label shows there, with its scope and expiry date. A PDF on its own proves little.
  • Use an ENX-approved providerOnly providers approved by ENX can run the assessment, and ENX publishes the list.

Level and labels, read from your request

A supplier letter usually states the level and labels, though the wording can be unclear. We start from that document and ask your customer when it is, so you are not assessed for the wrong scope.

Assessment level 2

You handle confidential customer data such as drawings, specifications or software.

Typical timeline: 8 to 12 weeks to assessment

Assessment level 3

You handle data marked for very high protection, or your customer asked for AL3 outright.

Typical timeline: 12 to 16 weeks to assessment

Prototype protection

You build, store, move, test or photograph prototype parts or vehicles.

Typical timeline: 12 to 16 weeks to assessment

TISAX next to German security rules

TISAX is contractual. It sits beside legal duties such as NIS2, and a good ISMS can feed all of them.

TISAX next to German security rules
FrameworkWhat it coversRelationship to TISAX
NIS2UmsuCGGerman NIS2 law, in force since 6 December 2025, including vehicle manufacturing as a covered sector.A label is not NIS2 evidence on its own, but most risk controls overlap.
ISO 27001A certified ISMS under a DAkkS-accredited body.A large overlap, though the label needs its own assessment and adds prototype controls.
VDA ISA 6 and ISA2027The catalogue the assessment uses.ENX has published ISA2027 as the successor for assessments ordered from 2027, so check ENX before you register.
Customer termsThe label named in OEM purchasing conditions.Shared through the ENX portal with the partners you choose.

The TISAX plan and your hours

A typical plan for a single-site supplier asked for AL2. AL3 and prototype labels add on-site work and physical security changes.

  1. Read the request and register

    We confirm level and labels and help you register with ENX.

    Week 1
    2 hrs
  2. VDA ISA self-assessment and fixes

    We complete the self-assessment with you and write what is missing.

    Weeks 2 to 8
    6 hrs
  3. Pre-assessment

    We check every question at target maturity and close the gaps.

    Weeks 9 to 10
    2 hrs
  4. Assessment and label

    The provider assesses you. We handle corrective action plans.

    Weeks 11 to 16
    4 hrs

Your team's time: about 14 hours. Labels are valid for up to three years.

Get my dated plan on a free call

Platform, large firm or Avantcert

Germany has many TISAX consultants who advise in German and on site. We work remotely, in English, at a published fee, so ask each option who completes the VDA ISA and what it costs.

How compliance platforms, large audit and advisory firms and Avantcert compare for TISAX
Compliance platformLarge audit and advisory firmAvantcert
Who writes the policies and evidenceYour team, from templates and integrationsTheir consultants, on a quoted engagementWe do. You review and approve.
Fee you can see before a sales callNot on the product pages we checkedNot on the service pages we checkedYes. $8,000 to $35,000, on this page.
Who audits youAn auditor you pick, often from a partner listUsually another firm, because audit firms limit advising the clients they assessAn independent ENX-approved audit provider. We never audit a client we prepared.

Based on public pages we checked on 4 November 2026. If you already run a compliance platform, we work inside it.

TISAX fees for German companies

Avantcert TISAX package prices by company size
Company sizeIllustrative comparisonAvantcert package pricePrice difference
Startup5–50 employees$13,500$8,000$5,500
Mid-Market51–200 employees$30,000$18,000$12,000
Large Enterprise201–500 employees$58,500$35,000$23,500

Avantcert reference package prices. Your final fee depends on team size and scope. We negotiate it on a call. Avantcert’s package price covers preparation and any required initial independent audit or assessment for the agreed scope. It includes the independent CPA fee for SOC 2 and delivery of the report or certificate when issued. Includes preparation and the initial assessment by an ENX-approved audit provider. Confirm the applicable ENX registration fee in your written quote. The comparison is illustrative. Use a written quote with the same scope and included services to calculate your savings.

  • Avantcert package prices by company size.
  • The ENX-approved audit provider bills the assessment, and ENX charges its own registration fee.
  • Prototype labels and extra sites raise both our fee and the assessment cost.
Get my fixed fee on a free call

TISAX in Germany: your questions

Was kostet eine TISAX-Zertifizierung?

Die Kosten bestehen aus drei Teilen: unserer Vorbereitung ab 8.000 US-Dollar, der ENX-Registrierung und dem Honorar des Prüfdienstleisters. Das Honorar hängt von Assessment-Level, Labels und Standorten ab. AL2 ist meist am günstigsten, weil es überwiegend remote stattfindet.

Wie lange dauert TISAX?

Für AL2 rechnen wir mit etwa 8 bis 12 Wochen Vorbereitung, für AL3 oder Prototypen-Labels mit 12 bis 16 Wochen. Danach folgen das Assessment und mögliche Korrekturmaßnahmen.

Beraten Sie auch auf Deutsch?

Unsere Zusammenarbeit läuft remote und auf Englisch. Wenn Ihr Team ausschließlich auf Deutsch arbeitet, sprechen Sie das bitte im ersten Gespräch an.

How much does TISAX cost in Germany?

There are three parts: our package price from $8,000, ENX registration, and the audit provider's fee, which depends on level, labels and sites. AL3 and prototype labels add on-site days.

Which TISAX level do we need, AL2 or AL3?

Your customer states it. AL2 is mostly a remote plausibility check of your self-assessment, while AL3 is a thorough on-site check required for strictly confidential data and prototypes.

What changes with VDA ISA2027?

ENX has published it as the successor to ISA 6 for assessments ordered from 2027. Your order date decides the version, so check ENX before you register and plan your gap analysis against the right one.

Does TISAX satisfy NIS2?

Not by itself. Many controls overlap, but NIS2 has its own duties such as registration with the BSI and incident reporting. Check whether your company is in scope.

Is TISAX a certification?

Formally no. You earn labels, valid for up to three years, that partners see on the ENX portal. German purchasing teams often still say "TISAX Zertifizierung".

Wie bekommen wir ein TISAX-Label?

Sie registrieren sich im ENX-Portal, füllen die VDA-ISA-Selbsteinschätzung aus, wählen einen zugelassenen Prüfdienstleister und bestehen das Assessment. Danach geben Sie das Ergebnis im Portal für Ihre Kunden frei.

Was ist der Unterschied zwischen AL2 und AL3?

AL2 ist überwiegend eine Plausibilitätsprüfung Ihrer Selbsteinschätzung und findet meist remote statt. AL3 ist eine umfassende Prüfung vor Ort. Welches Level gilt, legt Ihr Kunde fest.

Can we get TISAX without ISO 27001?

Yes. ISO 27001 is not a precondition. It shortens the preparation if you hold it, but many suppliers earn a label without one.

Get your TISAX scope and fixed fee

Two questions, a 30-minute call in English, and a written plan within 24 hours.

We havepeople and our customer asked for.