TISAX for Canadian auto suppliers in 2027
We read your customer's request, prepare you against the VDA ISA and support you until the label appears on the ENX portal.
- Level and labels taken from your customer's request.
- ISO 27001 or SOC 2 controls reused where the VDA ISA overlaps.
- Prototype protection planned for plants, test sites and shipping.
- Organizations supported by Avantcert
- 3,000+
- Typical fee for 5 to 50 employees
- $8,000
- Maximum TISAX label validity
- 3 years
Your TISAX scope
Step 1 of 2
Your TISAX estimate
5–50 employees, AL2
- Avantcert package price
- $8,000
- Price difference
- $5,500
- Timeline
- 8 to 12 weeks to assessment
Avantcert reference price. Your final fee depends on team size and scope. We negotiate it on a call. Includes preparation and the initial independent TISAX assessment for the agreed scope.
Pick a time for your free 30-minute call
Times show in your own time zone. Your answers travel with the booking.
Open the booking page or request a written quote.
Loading the calendar…
How much does TISAX cost in Canada?
Updated
Avantcert's TISAX package price starts at $8,000 for 5 to 50 employees to $35,000 for 201 to 500, against an illustrative comparison of $13,500 to $58,500. The assessment usually happens 8 to 16 weeks after we start: AL2 sits at the short end, AL3 and prototype labels at the long end. The package includes the agreed initial assessment by an ENX-approved provider. Labels last up to three years.
Ontario's auto parts makers sell to German groups, and Volkswagen's PowerCo is building a battery plant in St. Thomas. When those customers share confidential data or prototypes, they ask for a TISAX label. We read the request, prepare you against the VDA ISA and support you through the assessment. For assessments ordered in 2027, ENX specifies ISA2027. Confirm the order date and catalogue with your audit provider, then review supply-chain, prototype and operational-technology evidence against the new catalogue.
Why Canadian suppliers get asked
Canada's auto sector is concentrated in southern Ontario, with several large parts groups supplying global automakers, including German ones.
Parts and tooling makers
Suppliers receiving design data or prototype parts from German customers can be asked for information or prototype labels.
Battery and EV supply chain
Companies working with German-owned EV and battery projects may see TISAX in purchasing terms.
Software and engineering
Firms writing vehicle software or running simulations for German groups handle data classed as confidential.
Who does what on your TISAX
We prepare you and an ENX-approved audit provider decides. That separation is why your buyer trusts the result.
Scope
- You
- Share your customer's request
- Avantcert
- Confirm level and labels, register with ENX
Build
- Avantcert
- Complete the VDA ISA and write missing policies
- You
- Approve them and run the controls
Readiness
- Avantcert
- Run a pre-assessment at target maturity
- Independence line: we never audit a client we prepared
Assessment
- Avantcert
- Handle corrective actions, with no say in the result
- ENX audit provider
- Assesses you at the agreed level
Label
- ENX audit provider
- Publishes the result to the ENX portal
- You
- Share it with your customer
Who assesses you
ENX-approved audit providers carry out TISAX assessments. You register on the ENX portal, choose a provider and share the result. Check which providers can reach your Canadian sites, particularly for AL3.
We do the preparation and handle the corrective action plan. We are not an audit provider.
Check the auditor before your buyer does
- Get it in writingAsk your German customer's purchasing or security contact to confirm the labels, the level and which sites must be covered.
- See the result on the ENX portalA real label shows there, with its scope and expiry date. A PDF on its own proves little.
- Use an ENX-approved providerOnly providers approved by ENX can run the assessment, and ENX publishes the list.
Level and labels, read from your request
A Canadian supplier usually learns the level from a purchasing email. We start from that wording, so you are assessed for what was asked.
Assessment level 2
You handle confidential customer data such as drawings, specifications or software.
Typical timeline: 8 to 12 weeks to assessment
Assessment level 3
You handle data marked for very high protection, or your customer asked for AL3 outright.
Typical timeline: 12 to 16 weeks to assessment
Prototype protection
You build, store, move, test or photograph prototype parts or vehicles.
Typical timeline: 12 to 16 weeks to assessment
TISAX next to your existing work
TISAX is contractual, not Canadian law. Several frameworks you may already hold shorten preparation.
| Framework | What it covers | Relationship to TISAX |
|---|---|---|
| IATF 16949 | Automotive quality. | Covers quality rather than information security, so it does little for TISAX. |
| ISO 27001 | A certified ISMS. | A large overlap, though the label needs its own assessment. |
| SOC 2 | A security attestation. | Evidence supports many VDA ISA answers. |
| Customer purchasing terms | The label named in a supplier letter. | Shared through the ENX portal with partners you select. |
The TISAX plan and your hours
A typical plan for a single-site Ontario supplier asked for AL2. AL3 and prototype labels add on-site work.
Read the request and register
We confirm level and labels and help you register with ENX.
Week 12 hrsVDA ISA self-assessment and fixes
We complete the self-assessment with you and write what is missing.
Weeks 2 to 86 hrsPre-assessment
We check every question at target maturity and close the gaps.
Weeks 9 to 102 hrsAssessment and label
The provider assesses you. We handle corrective action plans.
Weeks 11 to 164 hrs
Your team's time: about 14 hours. Labels are valid for up to three years.
Get my dated plan on a free callPlatform, large firm or Avantcert
TISAX is less known in Canada than in Germany. Ask each option who completes the VDA ISA and who handles the corrective actions.
| Compliance platform | Large audit and advisory firm | Avantcert | |
|---|---|---|---|
| Who writes the policies and evidence | Your team, from templates and integrations | Their consultants, on a quoted engagement | We do. You review and approve. |
| Fee you can see before a sales call | Not on the product pages we checked | Not on the service pages we checked | Yes. $8,000 to $35,000, on this page. |
| Who audits you | An auditor you pick, often from a partner list | Usually another firm, because audit firms limit advising the clients they assess | An independent ENX-approved audit provider. We never audit a client we prepared. |
Based on public pages we checked on 4 November 2026. If you already run a compliance platform, we work inside it.
TISAX fees for Canadian companies
| Company size | Illustrative comparison | Avantcert package price | Price difference |
|---|---|---|---|
| Startup5–50 employees | $8,000 | $5,500 | |
| Mid-Market51–200 employees | $18,000 | $12,000 | |
| Large Enterprise201–500 employees | $35,000 | $23,500 |
Avantcert reference package prices. Your final fee depends on team size and scope. We negotiate it on a call. Avantcert’s package price covers preparation and any required initial independent audit or assessment for the agreed scope. It includes the independent CPA fee for SOC 2 and delivery of the report or certificate when issued. Includes preparation and the initial assessment by an ENX-approved audit provider. Confirm the applicable ENX registration fee in your written quote. The comparison is illustrative. Use a written quote with the same scope and included services to calculate your savings.
- Avantcert package prices by company size, in US dollars.
- The package covers the required initial independent assessment.
- A larger scope or more sites raise both figures.
TISAX in Canada: your questions
How much does TISAX cost in Canada?
There are three parts: our package price from $8,000 USD, ENX registration, and the audit provider's fee, which depends on level, labels and sites.
What is TISAX?
TISAX stands for Trusted Information Security Assessment Exchange. It is the auto industry's shared security assessment, run by ENX for the German VDA. You pass once and customers see the result on the ENX portal.
Which TISAX label do we need?
Your customer decides, usually in a supplier letter. Confidential data points to an information label, while handling parts or vehicles points to prototype labels.
We hold IATF 16949. Is that enough?
No. IATF 16949 covers quality, while TISAX covers information security and prototype protection. They are assessed separately.
How long does TISAX take?
About 8 to 12 weeks to be ready for AL2 and 12 to 16 weeks for AL3 or prototype labels, then the assessment and any corrective actions.
Are you a Canadian firm?
No. Avantcert works remotely from India, and the ENX-approved audit provider assesses your site.
Will every German customer ask for TISAX?
Not always. It depends on the data or prototypes you handle and on their purchasing terms, so read your supplier agreement or ask your contact.
Can an AL3 assessment happen in Ontario?
Yes, if the audit provider can reach your site. AL3 is on-site, so ask about availability and travel costs when you request a quote.
Does TISAX help with customers outside the German groups?
Sometimes. Other automotive companies participate in the scheme too, but its main pull is still German OEMs and their suppliers.
Get your TISAX scope and fixed fee
Two questions and a 30-minute call at a time that suits your province. The written plan follows within 24 hours.
